E-textiles, electro-craft, wearable electronics; it’s about taking technology and transforming it around your body, creating symbiosis. Helping technology meld seemlessly into the very fabric of our lives.
Whether you’re looking to augment the human condition or you’re more interested in the romantic ethereal glow of twinkly lights, you have to start somewhere.
This second workshop is for people who have used the LilyPad or Arduino before. Focusing on input we’ll look at using light and temperature sensors, and accelerometers. We’ll also look at multiplexing, both input and output, and making your own interfaces to connect regular electrical components to your LilyPad circuit.
The only thing you’ll need to bring with you is a laptop with USB port, everything else is provided. (If you want to bring your own LilyPad components that’s great, just let us know when you’re booking and we’ll make sure you have everything you’ll need.)
Important: please bring your own laptop with USB port. Closer to the event you will receive instructions on how to install the programming environment.
Optional materials; Any LilyPad board (preferably the Protosnap), with any sensor you’d like to use.
If you want to play with the LilyPad before buying, Protosnap boards can be provided for the duration of the workshop, but you’ll probably have to work in groups of at least two people.
Thursday, October 24th. From 7pm until 10pm. Cancelled
Cost: €10 for non-members, €5 for members. (All proceeds go to support TOG.)
Please register through the contact form below the cut.
This workshop has been cancelled. Check back for the rescheduled date.