This is the second part of the LilyPad workshops. This one focuses on mastering more involed actuators, and learning to get data from the many sensor components. Basically, you’ll be able to get your project to respond to the world around it. Imho, this is what makes e-textiles and wearables so exciting.
This second workshop is for people who have used the LilyPad or Arduino before. At least to blink an LED or two. Focusing on input we’ll look at using light sensor, temperature sensor, and accelerometer. And if we’ve time on output using the vibration motor and buzzer board.
We’ll also take a quick look at multiplexing, both input and output, and making your own interfaces to connect regular electrical components to your LilyPad circuit.
The only thing you’ll need to bring with you is a laptop with USB port, everything else is provided. (If you want to bring your own LilyPad components that’s great, just let us know when you’re booking and we’ll make sure you have everything you’ll need.)
Important: please bring your own laptop with USB port. Closer to the event you will receive instructions on how to install the programming environment.
Optional materials; Any LilyPad board (preferably the Protosnap), with sensors (e.g. light, temperature, accelerometer) and actuators (e.g. vibration motor, buzzer board).
If you want to play with the LilyPad before buying, Protosnap boards can be provided for the duration of the workshop, but you’ll probably have to work in groups of at least two people.
When: Thursday, February 13th. From 7pm until 10pm.
Cost: €10 for non-members, €5 for members. (All proceeds go to support TOG.)
Please register for this workshop through the contact form below the cut.
If you’ve missed your chance to sign up for the workshop, please keep an eye out for a rerun in the next few months.